E-MR-H2 Motor Separator

1. Key Operating Points for Hydraulic Disassembly Machines: Adjust equipment settings according to motor model specifications. During operation, first position the motor stator using the copper-cutting positioning plate. Activate the foot switch to control the cutting blade and sever the copper windings. Subsequently, place the cut motor stator onto the lifting platform of the copper extraction machine. Use the manual switch to raise and position the stator, then activate the foot switch to control the extraction pliers and pull the copper windings out from within the stator.
2. Dry Crushing and Sorting Equipment Features: The entire process operates in a sealed negative-pressure environment equipped with a pulse dust collection system for effective dust control. Note: Hard components such as large shafts, bearings, and gears must never be mixed with the material to prevent damage to the crusher.

1. Pre-Operation Inspection: Before startup, inspect transmission components, motors, safety guards, and other parts for integrity.
2. Standardized Operation: Ensure no foreign objects are present around the equipment. Follow startup procedures and avoid running the machine under no-load conditions.
3. Personal Protection: Always wear safety gear including hard hats, cut-resistant gloves, and safety goggles during operation.
4. Equipment Maintenance: Regularly check hydraulic oil levels and quality. Inspect components like drive belts and replace immediately if abnormalities are detected.

1. Foot pedal controls machine operation for extremely simple handling.
2. Blades are manufactured from manganese steel alloy and undergo dual treatment.
3. Copper separation rate reaches 100%.
4. Fully assembled upon delivery-no installation required.

étiquette à chaud: E-MR-H2 Motor Separator,Motor Recycling Machine